top of page
Asset 16_edited.jpg
Asset 3.png
Asset 5.png

SUBH 3.5" BRIDGING CLIP CONNECTOR

SUBH connector, and is suitable for many wind- and load-bearing situations where the load demand is light to moderate. Many applications require only one screw, greatly reducing labor costs and increasing productivity.

Asset 6.png

SSC STEEL-STUD CONNECTOR

SSC connectors are versatile utility clips ideal for a variety of stud-to-stud and stud-to-structure applications in cold-formed steel construction. 

Asset 7.png

P27SL POWDER LOADS

The P27SL strip loads work with Simpson Strong‑Tie PT-27 Powder-Actuated Tool and most other .27 calibre strip load tools. 0.27 Calibre Plastic, 10-Shot Strip Loads.

Asset 8.png

TITEN TURBO™ CONCRET & MANSONRY SCREW ANCHOR

The Titen Turbo screw anchor features an innovative Torque Reduction Channel to trap drilling dust where it can’t obstruct thread action, significantly reducing binding, stripping, and snapping without compromising strength.

Asset 9.png

STRONG-BOLT® 2 WEDGE ANCHOR

Code listed for cracked and uncracked concrete, and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions.

Asset 10.png

TIE-WIRE WEDGE ANCHOR

The Simpson Strong-Tie tie-wire anchor is a wedge-style expansion anchor for use in normal-weight concrete or in concrete over steel deck

Asset 11.png

PDPA POWDER-DRIVEN PIN

The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.300"-diameter head and a 0.157"-diameter shank. 

Asset 12.png

GDPSK SPIRAL KNURL GAS PINS

GDPSK gas pins are designed for attaching plywood and OSB to cold-formed-steel studs. The spiral knurl provides a positive lock and resists back-out. Installed with the GCN-MEPMAGKT, the GDPSK-138 gas pin provides faster installation and setup times, which contributes to lower labor costs. 

Asset 14.png

PDPAWL POWDER-DRIVER PIN WITH 1" WASHER

The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. 

Asset 24.png

PCLDPA POWDER-ACTUATED 90° CEILING CLIP

The PCLDPA is a powder-actuated assembly designed to attach ceiling wires to concrete. The PCLDPA consists of a hardened-steel PDPA pin attached to a 90° clip angle. 

Asset 13.png

SCW HEAD-OF-WALL SLIDE-CLIP CONNECTOR

The SCW connectors offer 1" of upward and 1" of downward movement. They are primarily used in head-of-wall applications that require vertical movement relative to the structure.

Asset 15.png

SDS-PLUS® DRILL BITS

They are designed to meet precise tolerance requirements and incorporate proprietary features that enhance durability and drilling speed, while improving ease of use. Regular and Quad Head bit tip, solid-tipped and Titen Turbo™ screw hex-bit configurations are available.

Asset 17.png

HEX HEAD DRIVER BITS (T-20, T-30) 2" LOBE BITS

 Simpson Strong-Tie hex driver bits contain a non-magnetized retainer ring that helps secure the screw head in the hex bit recess, allowing for a more secure drive.

​

 industrial-grade driver bits are specially designed for a secure fit with Simpson Strong-Tie fasteners and will outperform sub-standard bits commonly prone to cam-out and stripping.

Asset 18.png

BIT2S-2-R2 #2 SQUARE DRIVE 

Simpson Strong-Tie® driver bits are now color-coded to make size and type selection easier! Available in 6-lobe, square and hex drive, these new driver bits have color bands that make choosing the correct size for your fasteners a breeze.

Asset 19.png

BITHEXR14 1/4 IN. HEX-DRIVE 1 3/4 IN. POWER BIT

Simpson Strong-Tie hex driver bits contain a non-magnetized retainer ring that helps secure the screw head in the hex bit recess, allowing for a more secure drive.

Asset 20.png

BITHEXRR516-134 5/16" - 1 3/4" HEX POWER DRIVER BIT

The Bailey HFA Clip is a low cost method to accommodate the vertical deflection in exterior by-pass curtain wall conditions.

Asset 21.png

PCL 90° CLIP ANGLE

The PCL is a 90° clip angle designed to attach ceiling wires to wood or concrete. This 90° angle is 0.65" x 1.25" with a 0.323"-diameter hole in the shorter leg and a 0.217"-diameter hole in the longer leg. The PCL comes without a fastener.

Asset 22.png

ZINC NAILON™ PIN DRIVE ANCHOR

Zinc Nailon anchors are low-cost, easy-to-install anchors for applications under static loads.

Asset 25.png

READY-TRACK® FRAMING

Ready-Track framing is the fast and dependable way to frame curved walls on the jobsite. Simple to bend into smooth curves, it holds its shape without fasteners for easy positioning and installation.

Asset 1.png

READY-HAT® FRAMING

Whether the plans call for framing over a CMU wall or concrete column or just a curved transition from wall to ceiling, the Ready-Hat furring and framing channel is right for the job.

Asset 2.png

READY-ARCH® FRAMING

Creating arched openings and designs is simpler than ever with Ready-Arch framing members. Round, elliptical or s-shapes are all easy to form on the jobsite without any cutting or additional reinforcement. 

Asset 3.png

READY-ANGLE® FRAMING

The Ready-Angle framing angle adapts to almost any shape and curves in multiple directions, so it’s easy to form challenging compound curves and s-bends.

bottom of page